Not Sure What You Need? Call Us We Can Help!  

Blue Lab Conductivity Probe Care Kit

(No reviews yet) Write a Review
Sale
Add to Cart

Options

$11.99
$12.99
Or

Info

SKU:BLUELAB-PPM-CAREKIT ,Availability:

Info

SKU:
BLUELAB-PPM-CAREKIT
Availability:
Usually ships within 24 hours

Warranty

1 Year

Warranty

1 Year

Description

The BlueLab Conductivity Probe Care Kit

The BlueLab Conductivity Probe Care Kit is an essential for keeping your Blue Lab Conductivity Meter in great working shape.

Plants need a well rounded diet just like humans, but without the correct amount of nutrients they are suseptible to nutrient burn or deficiency. If a plant receives too much or too little nutrient, you could be wasting those expensive nutrients while at the same time damaging your plants. Your Blue Lab Conductivity Pen is the best way to determine how much nutrients your plant is receiving? That's why making sure it is in top working condition is a priority! 

There is no better way to care for your pen then to clean your conductivity probes regularly. Blue Lab has created specific care kits to assist you with this everyday task.

Please note that this is a care kit. Probe is not included. 

Your Conductivity Probe Care Kit contains:

  • Probe Care instructions
  • 2X 20 ml Blue Lab 2.77 EC Standard solution single use sachets.
  • Ble lab Conductivity Probe cleaner and Chamois
  • Plastic Cup

Why Choose BlueLab Conductivity Probe Care Kit?

  • Designed for Grower Environments
  • Used by growers all over the globe
  • Compact so it is easy to store.
  • Helps keep your pen working accuratley
  • Protects your Blue Lab Conductivity Pen Investment

How to Use BlueLab Conductivity Probe Care Kit:

Note: Calibration of the unit is not required.  The pen is factory calibrated.  Calibration instructions are listed in the user manual inlcuded with the pen. 

To Operate: 

Caring for conductivity probes
Nutrient salts build up on the probe face over time. Regular cleaning removes the
build up of salts and ensures accuracy of the readings. Accurate readings make it
easier to monitor the strength of your nutrient solution and improve the growth of your
crop.

Pen Daily Care Steps:

  • Keep the shroud on the probe at all times, except when cleaning.
  • Avoid touching the probe face, the oils from your fingers will contaminate the probe.
  • Rinse the probe head in fresh tap water after every use to reduce nutrient build up.
  • Clean and test your conductivity probe every 30 days.
  • Clean the probe with a liquid scourer cream used in home bathrooms and kitchens (such as soft scrub).
  • Never use scented varieties of cleaner as they contain oils that contaminate the probe face.
  • Calibration is not required for Bluelab conductivity products. They are factory calibrated, so only require cleaning and testing.
  • The Bluelab EC pen can be calibrated, instructions are on the back of the meter. Clean the probe first!

Cleaning Instructions:

  1. Remove shroud. For the Bluelab Truncheon® Meter (V2): Twist the shroud 90 degrees and then remove the shroud. For all Bluelab Conductivity/Temperature Probes and Bluelab Truncheon® Meter (V1): Warm the shroud in your hand for a few seconds to help with removal. Hold the body and pull the shroud off.
  2. Clean the conductivity probe face. Place one or two drops of Bluelab Conductivity Probe Cleaner onto the probe face and rub with the Bluelab Chamois or your finger firmly and vigorously.
  3. Rinse the conductivity probe face. Rinse off all traces of cleaner under running tap water whilescrubbing the probe face with the other side of the Bluelab
    Chamois or the same finger.
  4. Check that the water forms a smooth film on the
    probe face, without any beads of water. If you can see beads of water, repeat steps 2 and 3.
  5. Refit the shroud and test in 2.77 EC Conductivity
    Standard Solution to ensure cleaning was adequate. Place the probe tip into the solution, wait for the reading to stabilize to a constant value. This can take a few minutes while the probe adjusts to the temperature of the solution.
    Repeat the cleaning process if the reading given is not within 0.1 EC/1 CF of 2.8EC
    NOTE: The shroud MUST be left on the probe when taking readings.


Why Buy BlueLab Conductivity Probe Care Kit From Grow Greenwellness?

All of the members of our staff at Grow Green Wellness are growers and we care deeply about our plants just as you probably do. We want to feed our plants the best possible nutrients and we want to provide you with the best possible nutrients as well. 

We research and vet all of the nutrients sold in our shop to ensure they are safe, effective, and consistent. You can take comfort knowing that anything you buy has already been rigorously tested. Buying from Grow Green Wellness means you’re buying some of the best grow products money can buy at some of the most affordable prices available online. 

In addition to competitive pricing and product quality, we offer fast shipping and unrivaled support. Our team is committed to the success of your grow!

Customers Also Viewed